Manufacturer of diaphragm pump components for all major OEMs
Centrifugal pump components
Part weights up to 60 lb.
Wall thickness up to 2.5"
Produce casings, covers, and impellers for several major brands
Body – Gas Valve
Part weight: 91 lb.
Wall thickness: 4-1/2" with no voids
Manufacturer of gas valve components from 8" to 12"
Filter Housings – Industrial
Part weights up to 50 lb.
Wall thickness up to 1"
Manufacturer of several industrial filter assemblies
Custom Filter Plates
Part Weight: 180 lb.
Wall thickness: 2-1/2"
Custom plate used for removal of solids from cooling fluids
Filter Housings – Residential
Part Weight: (2) 54 lb. halves
Part Thickness: 1"
Filter components for residential swimming pools filter assemblies
Flange adaptors
Part Weight: up to 225 lb.
Part thickness: up to 5"
Flange adaptors ranging from 4" to 24" sizes
Pipe fittings
Part Weight: 29 lb.
Wall Thickness: 2"
12" Pipe End Cap
Impeller
Part Weight: 18 lb.
Wall Thickness: 1"
Polypropylene impeller, used in industrial flow meters, has molded-in stainless steel inserts for attachment.
Chlorine Cell Plate
Use existing picture and description
Electrochemical Cell Box
Part Weight: 72 lb.
Wall Thickness: 1-1/2"
Polypropylene cell box used in ballast water treatment
Electrowinning cell frame
Part Weight: 45 lb.
Wall Thickness: 1"
Polypropylene frame used in nickel processing
Fighter Jet Canopy
Part Weight: 60 lb.
Wall Thickness: 3/4"
Polypropylene frame used in nickel processing
Riser Clamp
Part Weight: 80 lb.
Wall Thickness: 1-1/2"
Polyethylene riser clamp used to secure control lines
Support Grids
Part weight: 40 lb.
Wall thickness: 5/8"
Support grids used in sand filtration systems, tower packing supports and floor-supported walkways in wet or chemical environments.
Cyclone Separator
Part weight: 105 lb.
Wall thickness: 1-1/4"
Liquid cyclone separator components used for high temperature pulp filtration replaces vinyl-lined cast iron parts at substantial weight and cost savings.
"Z" Leg Bench Support
Part Weight: 4 lb.
Wall thickness: 7/8"
"Z" legs used as seat supports in the marine industry replaces cast aluminum components which corroded in the seawater environment.
Battery Containers
art Weight: 30 lb.
Wall thickness: ¾"
Industrial battery containers provide lighter weight and superior corrosion resistance at a lower cost than their
fabricated metal counterparts. Special molded-in features improve marketability of the product.
Food Handling Equipment
Part Weight: up to 30 lb.
Polypropylene parts used to replace expensive stainless components
